WELCOME to the EMC Training Foundation
The worldwide EMC Training course scene is very complex. Given that EMC Training courses can be given to the public or in private; on or off-line, tailored or in-house, basic or advanced, and over a broad range of topics; also given that times change around the world, venues change and prices vary enormously, it is simply impossible for a single website to list all relevant courses.
We are therefore publishing a list of carefully Selected Training Courses, followed by a section dedicated to Private In-House Training Courses. The penultimate section is a list of Training Course Providers, with finally a section on Courses of Interest
If you have an interest in EMC and EMC training courses, then it is very likely that you will have an interest in Product Compliance in general. We have a closely related but seperate PRODUCT COMPLIANCE TRAINING FOUNDATION, which lists a range of Product Compliance courses.
Selected Training Courses
As well as selecting the courses below for both their relevance and their quality; we have chosen them because they are public/open-enrolment courses that are repeated on a regular basis, unless stated otherwise.
If you have an EMC Training Course that you would like us to add to this page, please go to our Request to Publish page
CE and UKCA Marking Essentials
All companies that sell products on the European market must be able to demonstrate that the products meet applicable EU requirements. CE marking is the manufacturer’s declaration to the authorities that the product meets all the requirements placed on it by the relevant Directives. The consequence of not having full control of their CE marking can be costly, especially if there is an incident with the product or if the product fails a market surveillance by the responsible authority.
A distinct but similar set of requirements now exists for the GB market under the new UKCA marking.
This EMC training course seeks to provide you with the information and skills to understand CE Marking and UKCA marking Essentials and enable you to comply with a range of Directives and Regulations, along with covering other product legislation. It is aimed at companies who manufacture, import or distribute products for sale or use within the European Economic Area
Duration: 1 Day, Venue: Live On-Line
LINK for FULL DETAILS and REGISTRATION
Introduction to EMC Directive (STU101)
This course provides an overview of the “economic operators” (i.e. manufacturers, importers, distributors) responsibilities and how they are discharged explaining the differing requirements for apparatus and fixed installations and the compilation of Technical Documentation. The selection of suitable harmonised/designated EMC test standards and EMC testing is explained with alternative methods of assessment. The differing requirements for specific apparatus in fixed installations are explained.
Duration: 1 Day, Venue: Virtual Classroom
.LINK for FULL DETAILS and REGISTRATION
Power Electronics Design Boot Camp
Electrical, Thermal, EMI, Reliability, and New Devices
You will learn to master critical subjects for effective design of power electronics, like EMI/EMC, thermal, and reliability design and selection. Expert instructors in the field will teach you to analyze and control power electronic design. They will also expose you to new power electronic devices like Silicon Carbide (SiC) and Gallium Nitride (GaN) devices.
Duration: 4 Days, Venue: Madison, Wisconsin, USA or Live Online
.LINK for FULL DETAILS and REGISTRATION
Electronic Product Design for EMC
“The obvious passion that James has for the subject of EMC came across strongly in the training. He presented ways of looking at situations that help you understand what’s going on without getting bogged down in too much theory…along with the excellent demonstrations this really brought what can be a dry subject to life. I definitely left the training with a much better understanding of the pitfalls that await a product design that has been undertaken with little consideration of the potential EMC issues.”
Duration: 3 Days, Venue: Leeds, Yorkshire, UK
.LINK for FULL DETAILS and REGISTRATION
ISO/IEC 17025
General Requirements for the Competence of Testing and Calibration Laboratories
The general requirement for the testing and calibration laboratories is critically important to both you and your customers. That’s why BSI has developed a short session that makes you aware of what requirements are and why is it important to ensure good laboratory practices. Understanding the consequences of poor or improper practices and the effect it has on your organization and its reputation. We’ll also consider how you are a vital piece of a larger jigsaw and what you can do to help your organization meet its quality objectives.
On-demand – EMC training that’s even more flexible
BSI’s on-demand courses are market-leading and available 24/7. Developed by top subject matter experts, they contain the same high-quality content you will find in our tutor-led training, but with the added benefit of being able to learn at your own pace and at any time….
Duration: 40 Minutes, Venue: On-demand elearning
LINK FULL DETAILS and REGISTRATION
Fundamentals of EMC
– Apparatus and system design for EMC
The course gives you as a participant knowledge of how to design electrical and electronic systems to achieve the best possible EMC characteristics. We go through what sources can interfere with electronics and how the interference can occur. Based on this, we look at various measures for how to protect yourself from these sources of interference and achieve good EMC.
The course contains a review of electromagnetic concepts and basic principles as well as unwanted properties of components. The action principles and work methodology in the course are based on the zoning principle.
In the course, we mix theory with practical examples and laboratories. On selected occasions, we ask small thought-provoking questions in a digital platform so that you can reflect on the material.
Duration: 2 Days, Venue: Mölndal, Västra Götaland, Sweden
LINK for FULL DETAILS and REGISTRATION
Requirements of the Medical Device Regulation for CE Marking
This one-day medical device training outlines the key requirements, concepts and overall process for CE marking under the medical device regulation. It’s suitable for anyone working in regulatory affairs/quality assurance or staff partnering with medical device manufacturers.
This stage of your learning journey creates a solid base for implementing your own CE marking projects. It provides essential knowledge about EU medical devices and regulatory affairs from all areas of an organization. It also explains the demands that fall on subcontractors, importers and distributors.
After completing this medical device training, you will have a sound understanding of the medical device regulation and be able to communicate it to others. You will also gain eight CPD points and take away comprehensive training course notes
Duration: 1 Day, Venue: Live On-Line & Live on site
LINK for FULL DETAILS and REGISTRATION
CORE EMC Design Webinar (CKC101)
In this webinar, we will delve into fundamental aspects of grounding: what is a ground, how to ground, common problems in grounding systems, cable grounding and more. Shielding and bonding theory covers E & H field shielding, absorptive, reflective and multiple reflection losses, seams, apertures, and other techniques. PCB layout design theories includes board stack up, trace routing, how to provide power and grounds, zoning, and filtering needs.
Duration: 4 Hours, Venue: Webinar.
LINK for FULL DETAILS and REGISTRATION
If you have an EMC Training Course that you would like us to add to this page, please go to our Request to Publish page
Implementation of Medical Device Regulation for CE Marking
This three-day course from your partner in learning is especially useful for regulatory affairs, quality management and quality assurance professionals who need to implement the medical device regulation (MDR). The MDR training is also designed for people working for organizations that partner with Medical Device manufacturers.
You will learn all the requirements needed for conformity assessment, how to fulfil technical documents and how to plan post-market activities required by the MDR. By the end of the course you will be able to put all this knowledge into working practice in your organization.
With the opportunity to gain eight CPD points on completion and comprehensive training notes, this MDR training is everything you need to guide and support others
Duration: 3 Days, Venue: Live On-Line & Live on site.
LINK for FULL DETAILS and REGISTRATION
EMC Basics – Test & Measurement (RAS101)
Seminar for MIL and Avionic Standards
The EMC aircraft group with the associated labs are an ideal environment for the seminar. The vast experience in aircraft measurements, system and equipment testing is combined with the latest high end test infrastructure.
Focus of this EMC training course are basics of EMC and common EMC testing according to MIL-STD-461 and EUROCAE ED-14 / RTCA DO-160. Details of test setups are discussed, accompanied by practical examples.
Duration: 2 or 3 Days, Venue: Unterleinleiter, Bavaria, Germany
LINK for FULL DETAILS and REGISTRATION
EMC Antennas and Radiated RF Measurements (ROH101)
This course provides an overview of radiated electromagnetic compatibility (EMC) measurement fundamentals including EMC antennas and their characteristics.
Duration:1 |Hour, Venue: Available on-demand 24/7
LINK for FULL DETAILS and REGISTRATION
EMC Basics – High Intensity/High Energy Radiated Fields (HIRF/HERF) (RAS102)
Electromagnetic Effects in Aircraft
The combination of experience and infrastructure enables an experimental portion which includes demonstrations and seeing test setups. Visits and experiments are conducted in small groups.
Various kinds of sites are part of the course, among them are an anechoic chamber, an open area test site (OATS), a GTEM cell, a TEM cell, a reverberation chamber as well as lightning test setups. Examples are provided. Discussion and questions will be part of the seminar.
Duration: 2 or 3 Days, Venue: Unterleinleiter, Bavaria, Germany
LINK for FULL DETAILS and REGISTRATION
Lightning Electromagnetic Effects on Aircraft (RAS103)
The combination of experience and infrastructure enables an experimental portion which includes demonstrations and seeing test setups. Visits and experiments are conducted in small groups.
Various kinds of sites are part of the course, among them are an anechoic chamber, an open area test site (OATS), a GTEM cell, a TEM cell, a reverberation chamber as well as lightning test setups. Examples are provided. Discussion and questions will be part of the seminar.
Duration: 2 Days, Venue: Unterleinleiter, Bavaria, Germany
LINK for FULL DETAILS and REGISTRATION
Fundamentals of Acceptance Sampling
An acceptance sampling method allows for continuous control of the quality of products.
It is a statistical procedure, used in quality control, which involves testing a batch of samples to determine if the proportion of units having a particular attribute exceeds a given percentage, and are thereby accepted or rejected.
This course is an introduction into Acceptance Sampling and therefore the following topics are not covered: producer and consumer risk, OC curves and control limits
Duration: 1 Day, Venue: In-house/Private only
LINK for FULL DETAILS
Electromagnetic Interference in RF and Digital Circuits (ROH102)
This course discusses different types of electromagnetic interference (EMI) commonly found in RF and digital circuits together with practical techniques for minimising EMI effects. The course begins by introducing some basic EMI concepts and mitigation techniques before illustrating how these are applied in practice through a range of case studies.
Duration: 2 Hrs, Venue: On-Line – Available on-demand 24/7
LINK for FULL DETAILS and REGISTRATION
Fundamentals of the Standards Landscape
Do you want to know how standards are made? Have you ever wondered how International Organization for Standardization (ISO), The British Standards Institution (BSI), and the International Accreditation Forum (IAF) work together to create standards?
This one-day training course walks you through how standards are made in the international landscape, starting with how the IAF works and its role in the international standards community.
The course explores the role and function of national standards bodies, accreditation bodies, certification bodies, national standards regulators, and professional bodies and how their work impacts how you audit, implement, or teach the subject of standards making
Duration: 1 Day, Venue: Live On-Line
LINK for FULL DETAILS and REGISTRATION
EMI Analysis at Board Level with Oscilloscopes (ROH103)
Electronic modules often contain a multitude of functional units in tight space. Interference between the units has to be minimized during the design phase. The detection of EMI should start as early as possible, in order to avoid unpleasant surprises during conformance test later on. Vice versa, the wireless communication signals present in the environment can impair the correct operation of the circuitry. This course covers typical EMI topics, and the use of oscilloscopes for the detection of disturbances. The delimitation against classical RF equipment like spectrum analyzer, or measurement receiver, is discussed as well.
Duration: 3 Hrs, Venue: Online – Goto Training
LINK for FULL DETAILS and REGISTRATION
We shall be adding Training Courses as we select them, and knowing that they will be repeated on a regular basis. This makes this page worth visiting on a regular basis.
If you have an EMC Training Course that you would like us to add to this page, please go to our Request to Publish page
Private/In-house/Bespoke Courses
We appreciate that this type of course is normally the result of an in-depth discussion and negotiation with the host. We also understand that each course, while typically made up from a number of standard modules, is essentially unique.
Having said that, there is no reason why a public course syllabus cannot be presented to a private group.
We are currently working on the best way to present our capability, which we hope to publish shortly.
In the meantime, if you have a requirement for an In-house Product Compliance or EMC course please do not hesitate to contact us on +44 (0) 7745 841 654.
Thank you
Training Course Providers
All the individuals or organisations listed below either organise or present EMC Training Courses. We have chosen these companies because the courses they present represent a major part of their business.
BSI TRAINING ACADEMY
EMC, Medical Devices, ISO/IEC 17025
Kitemark Court, Davy Avenue, Knowlhill, Milton Keynes, MK5 8PP
Telephone Number: 0345 086 9000 Email: training@bsigroup.com
LINK TO BSI TRAINING COURSE PAGE
TÜV SÜD TRAINING ACADEMY
EMC, Functional Safety, Machinery, Medical
Octagon House,, Concorde Way, Segensworth North, Fareham, Hampshire, PO15 5RL
Telephone:- Number +44 (0) 1489 558100
Email: academy.uk@tuvsud.com
LINK TO TUV SUD TRAINING COURSE PAGE
The ROHDE & SCHWARZ TECHNOLOGY ACADEMY
EMC, RF & Microwave Technology, 2G to 5G, Wireless Broadcast
Mühldorfstraße 15, 81671 München, Deutschland
Telephone Number:- +49 89 4129 – 0
BRUCE ARCHAMBEAULT PhD
EMC
PO Box 1265 Four Oaks, North Carolina, 27524 USA
Telephone Number :- +1 919-963-2025
CHERRY CLOUGH CONSULTANTS
EMC
9 Bracken View, Brocton, Stafford ST17 0TF England
Telephone Number :- +44 (0) 1785 660247
COMPATIBLE ELECTRONICS
EMC & Product Safety
102 Olinda Dr. Brea, 92823 California USA
Telephone Number :- +1 (714) 579-0500
EMCCons DR. RAŠEK GmbH & Co. KG
EMC, HERF/HIRF, LIGHTNING
Boelwiese 8 91320 Ebermannstadt Bavaria Germany
Telephone Number :- +49 9194 7262-0
CONFORMANCE Limited
EMC, LVD/Electrical Safety, ATEX/DSEAR, Machinery, PUWER
Great Hucklow Buxton Derbyshire SK17 8RG England
Telephone Number: +44 (0)1298 873800
EMC Services Elmiljöteknik AB
EMC
Sallarängsgatan 3, 431 37, Moelnda Sweden
Telephone Number :- + 46 (0) 31 337 59 00
LearnEMC
EMC
P.O. Box 729 Stoughton, WI 53589 USA
Telephone Number: +1 608-205-6608
ESDA – Electrostatic Discharge Association
ESD
On-line only…….ESDA Website
CKC Laboratories
EMC, LVD
110 North Olinda Place Brea, CA 92823, USA – Telephone Number :- +1 (714)993-6112 ext 2300
EMC Fastpass
EMC
2465 Brookfield Drive, Courtenay, British Columbia, Canada, V9N 0E6
Telephone Number:- +1-250-898-4567
Kimmel Gerke Associates, Ltd.
EMC
2538 W. Monterey Ave, Mesa, 85202 Arizona USA
Telephone Number :- +1-480-755-0080
Andre Consulting, Incorporated
EMC + ESD
3306 144th St. SE Mill Creek, Washington USA 98012-5010
Telephone Number:- 01 (206) 406-8371
Product Approvals Ltd
CE Marking + Machinery
Unit C2, Coalport House, Stafford Court, Stafford Park 1, Telford , TF3 3BD England
Telephone Number :- +44 (0)1588 620192
Technology International Europe
EMC, ATEX, LVD, Machinery, & RED
56 Shrivenham Hundred Business Park, Shrivenham, Swindon, Wiltshire, England
Tel. No. :- +44 (0)1793 279233
EUROFINS ELECTRICAL & ELECTRONIC UK LTD
UNIT 1 GROUND FLOOR, ARABESQUE HOUSE, MONKS CROSS DRIVE, YORK, YO32 9GW, England
Telephone Number:- +44 (0) 330 430 3456
TONEX
6275 W. Plano Parkway, Suite 50
Courses of Interest
Whilst we want the focus of this site to remain on EMC, it would be remit of us not to include training courses which we thought were worth bringing to the attention of Electrical and Electronic Engineers.
To that end we have selected a number of training courses, which you can view here, from the BSI Training Academy.
LINK TO BSI TRAINING COURSE PAGE